What’s in this Guide? Introduction Connecting EX90 Using EX90 TANDBERG EX90 User Guide D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Thank you for choosing TANDBERG! Your TANDBERG EX90 has been designed to give you many years of safe, reliable operation. Our main objective with this User Guide is to address your goals and needs. Please let us know how well we succeeded! The web interface of the EX90 is treated in detail in the Administrator Guide, which is available for download separately. May we recommend that you visit the TANDBERG web site regularly for updated versions of this Administrator Guide.
What’s in this Guide? Introduction Connecting EX90 Using EX90 CHAPTER 1 INTRODUCTION D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Intellectual Property Rights Copyright Notice This User Guide and the Products to which it pertains contain information that is proprietary to TANDBERG and its licensors. The product covered by this User Guide is protected under copyright, patent, and other intellectual property rights of various jurisdictions. This product is Copyright © 2010, TANDBERG All rights reserved.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Safety Instructions Vibration For your protection please read these safety instructions completely before you connect the equipment to the power source. Carefully observe all warnings, precautions and instructions both on the apparatus and in these operating instructions. Keep this manual for future reference. Do not operate the apparatus in areas with vibration or place it on an unstable surface.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Accessories (WEEE—Waste Electrical and Electronic Equipment) and 2002/95/EC (RoHS). Use only accessories specified by the manufacturer, or sold with the apparatus. The primary aim of the WEEE Directive and RoHS Directive is to reduce the impact of disposal of electrical and electronic equipment at end-of-life.
Introduction Connecting EX90 Using EX90 537mm What’s in this Guide? 172mm D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 CHAPTER 2 CONNECTING THE EX90 D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 Connecting the TANDBERG EX90 The Settings Web interface Connecting Connect the cables as shown. Sockets are located behind the rear cover. If you have one LAN connection only—and need that for your PC—the TANDBERG EX90 has a built in Gigabit ethernet switch that enables you to connect your PC to the TANDBERG EX90 to access the LAN through the TANDBERG EX90.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Calling another Connecting a PC (optional to the unit feature) Calling another Setting the screen (optional resolution feature) Your TANDBERG EX90 has an HD display, which also may serve as your PC screen. Connect your PC to the sockets on the rear panel as shown below. For optimal PC image quality, digital output (DVI) from the PC is recommended.
What’s in this Guide? Introduction Connecting EX90 Using EX90 CHAPTER 3 USING THE EX90 D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 Camera adjustments Use as document camera Tilt the camera as shown to use it as a document camera. Image is automatically turned upside down, so that both parties will see the document correctly. The camera can be tilted mechanically in vertical direction. Turn the circumference to activate the privacy shutter. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface inTouch controller—initial view Information bar Select between handset, headset and speaker Do not disturb Microphone mute (on/off) Volume System setup Any messages while you were away? Numeric keypad or alphanumeric keyboard Your personal phone book, generated and maintained by you Tap the touch pad to wake up the system, if needed. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Initial settings—before you begin Tilt the camera to obtain the best view. The best view wil be the view that positions your face as high up on the screen as possible without cutting off the top of your head. Tap Selfview to see what others will see of you. Tap Camera. D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 Use + and – to adjust the zoom. 14 If you need to adjust zoom, tap Setup.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Calling someone by dialing alice.wonderland@company.com Tap Dial pad. Use the numeric keypad for numbers, or use the keyboard mode. Tap the green Call button to place the call. Terminate the call by tapping the red Terminate call. D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 15 Tap abc to change to keyboard and 123 to change back.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Calling someone using Recent calls Tap Recent calls to display the list of recent calls. Recent calls is a list of placed, missed and received calls since the last time you cleared the list. Calls placed Scroll by dragging up or down anywhere in these lists. Calls received Calls missed Tap the entry to be called. This will cause the Call button to appear.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Calling someone using My contacts Tap My contacts to display your personal phone book. Scroll by dragging up or down anywhere in the list. Call the entry now. Add to call1. Edit before calling. Edit the entry itself. Remove the entry. Contract list. Systems with the optional Add to call let you specify which two to call before you call them.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Calling someone using the Phone book Tap Phone book to display the corporate phone book. Phone books may have subfolders. Tap a subfolder to display its contents. Scroll by dragging up or down anywhere in these lists. Tap the entry you want to call. You may expand the list to get the same options as on the previous pages. Tap Call to place the call. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Search the Phone book, then call Tap Phone book to display the corporate phone book. Tap in the search field to start searching for an entry. The keyboard will now appear. You may expand the list to get the same options as outlined on the previous pages. Tap Call to place the call. D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010 19 Start keying in the entry. Matches will appear as you write.
What’s in this Guide? Introduction Phone book matters Connecting EX90 Using EX90 The Settings Web interface Entering a new contact manually The contents of the phone book cannot be altered by the user. However, any entries in the phone book may be copied to My contacts and altered there, if needed. In addition the “number” of any call received or dialed (including entries in the list of recent calls) can be entered into My contacts.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Calling more another than (optional one (I) feature) You can be in a call with two others simultaneously, or one at a time. This is an optional feature that may, or may not, be present in your system. Tap Add to call another. You may want to (but do not have to) put the current call on hold first. Place the call.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Calling more than one (II) To put one of the participants on hold, tap that participant. A menu will appear next to that person allowing you to put him or her on hold. To put both on hold, tap Hold (next to the red Terminate call button), as outlined. Tap on the participant on hold to display options.
What’s in this Guide? Introduction Calling another Receiving calls (optional feature) Connecting EX90 Using EX90 The Settings Web interface Calling another Receiving another (optional call while feature) already in a call If you already are in a call and someone else calls you will get the following options: • • • • Tap Accept to accept the incoming call or Reject to reject it. Do not disturb The Do not disturb feature can be activated to disable the incoming call alert signal.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The TANDBERG EX90 can be configured via the inTouch controller or via its web interface. For full access to all configurable parameters the web interface must be used—the inTouch controller provides access to a limited set of parameters only. CHAPTER 4 THE SETTINGS—USING INTOUCH D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Setting the TANDBERG EX90 in standby Reverting to factory default settings Outside a call, you may have the unit enter standby mode by touching the Power button on the main unit (the screen). The Standby dialog is displayed and the unit enters standby immediately. This does not work when you are in a call. To revert to the factory default settings, do as follows: 1. Web interface Disconnect the power cord. 2.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Entering the Settings menus Select the tab required by tapping on it. Tap Setup. Tap a field to enter the corresponding settings. Tap Settings to gain access to the Settings. If both DVI and HDMI are connected to external sources, a Source button will appear in addition, letting you select which source to display. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 Call settings The Call settings let you define whether your EX90 shall respond automatically to incoming calls or not. If you set it to Auto answer On, you may specify a delay from the moment an incoming call appears until the unit responds. The delay can be set to 0–50 seconds in one-second steps. You may also specify: • • • Maximum outgoing and incoming bandwidth. The two may have different settings.
What’s in this Guide? Introduction Connecting EX90 Using EX90 Date, time & location The Date, time & location settings let you specify: • • • • 24h or 12h time format. Your preferred date format. Your preferred time zone. Whether date and time shall be set automatically or manually. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 Ringtone & sound settings The Ringtone & sound settings let you specify: • • • Audible tones when tapping keys on or off. The ringtone volume. The type of ringtone. Tap a ringtone to hear what it sounds like. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 Display settings The Display settings let you adjust: • • • Preferred brightness by moving the Brightness slider. The color balance. There are four preset color settings (Cold, Neutral, Warm and your own (Custom)) available. When you select Custom, you may use the Red, Green and Blue sliders to specify your own setting. The DVI mode can be set to automatically detect the type of video signal received, or forced to analog or digital.
What’s in this Guide? Introduction Connecting EX90 Using EX90 Camera control & settings The Camera control & settings let you specify: • • • The Whitebalance setting. The Exposure setting. Whether Backlight compensation shall be activated or not. Backlight compensation is used to avoid that you appear darker than needed whenever there is much light behind you. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 IP settings The IP settings let you specify: • The use of DHCP or Static IP addresses. If you decide to use Static, make sure you tap Save before leaving the menu. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings H.323 settings The H.323 settings let you specify: • • • • • An H.323 alias. Your H.323 id. Gatekeeper discovery (Manual or Automatic). The Gatekeeper address must be specified by you if discovery has been set to manual. Authentication mode On or Off. If set to On, the EX90 will send Login name and password to the Gatekeeper for authentication. In addition there are: • Two fields to enter Login name and password.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings SIP settings The SIP settings let you specify: • • • • • • Your URI. The Default transport layer, this can be set to TCP, UDP, TLS or Auto. The proxy type can be set to Standard, Alcatel, Avaya, TANDBERG, Microsoft, Nortel, Experimental, Siemens. The experimental setting is for testing purposes. Outbound is not used in this version. Proxy discovery can automatic or manual.
What’s in this Guide? Introduction Connecting EX90 Using EX90 System information The System information provides all the system information at a glance. Scroll down to also see status on video inputs (DVI and HDMI). D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 Call status The Call status provides all the call status information at a glance. D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 CHAPTER 5 THE WEB INTERFACE D 14724.02 TANDBERG EX90 User Guide (TC3.
What’s in this Guide? Introduction Connecting EX90 Using EX90 The Settings Web interface Entering the web interface Key in the IP address of your TANDBERG EX90 in your browser to access its web interface. System information page is accessed here. This is the “Home page” of your video system. Software upgrades of the system are done from here. The advanced configuration is accessed from here. Wallpaper for the system’s main screen (not the inTouch) is uploaded from here.
What’s in this Guide? Introduction Upgrade software Connecting EX90 Using EX90 Advanced configuration Web interface Log files Call When upgrading your software you will need a release key and an option key. Contact your local TANDBERG representative for details on software upgrades. The Settings Log files may be requested by the Support Dept. when support is needed. You may also call someone from the web interface.
