User's Manual

For Windows Vista

For Windows Vista, by installing the software, the USB device driver will

also be automatically installed.

Please check whether the USB device driver has been properly

installed.

Checking the USB Device Driver Installation ( Vista)

1. Connect the RTR-500 with the supplied USB communication

cable to the computer.

2. Open the Device Manager Window by Opening the [Control

Panel] and click on [System and Maintenance] - [System] - [Device

Manager].

3. If under "Port (COM & LPT)" appears "TandD General UsbUart

Port" the USB device driver has been properly installed.

If successful

If failed (ex.)

- "TandD General UsbUart Port" will not appear if the RTR-500 has not been

connected to the computer.

- If "? Other Device" - "?! TandD USB-UART Controller" appears, it means the

USB device driver was not properly installed.

Please reinstall by following the directions on page 21.