User's Manual

Introduction
6
CAUTION
Please note that this Introductory Manual has been written based on
the presupposition that details about contracts with an Internet
provider, specific network environments and the set-up of any other
necessary equipment to enable network connection has already
been taken care of by the User and that connection has been
confirmed as workable.
T&D Corporation shall not be responsible for any damages which a contractor, a user
or a third party may suffer, whether direct or indirect, due to the inability to
communicate or use communication devices.
Further, T&D is not responsible for any damage, malfunction or
trouble, whether direct or indirect, caused by the use of our products.
This Unit has been designed for private and/or industrial use only.
It is not for use in situations where strict safety precautions are
necessary such as in connection with medical equipment, whether
directly or indirectly.
Harmful gases or chemicals may cause corrosion and/or other
danger to the Unit. Also, coming in contact with hazardous
substances, may cause harm to people handling the Unit. Therefore,
do not use or store the Unit in any environment that is exposed to
chemicals and/or harmful gases.
This Unit is not waterproof.
If the Unit gets dirty, wipe it with a clean cloth.
Do not store, leave, or use the Unit in any place exposed to direct
sunlight, high temperature, extremely low temperatures, or high
humidity.
This may cause deformation to both the outside casing and the inside. It may also
cause condensation on the inside of the Unit leading to fire or electrocution.
Please do not insert fingers or foreign objects into cable connection
jacks.
Make sure that all cable plugs are inserted fully, so as not to cause
an improper connection. Also, when unplugging cables from the Unit,
do not pull the cord, but hold the connector to disconnect.
Do not cut or process the cords for the AC adaptor or the
communication cables. Also, do not twist, pull on or swing any of the
cords.