User's Manual

7
Introduction
Do not use an AC adaptor other than one that is specified for use
with the Unit.
It may cause fire or malfunction.
Do not put anything on top of the AC adaptor.
This may cause overheating.
To prevent damage to the Unit from static electricity, remove static
electricity from your body by touching metal around you (door knob,
window frame) before touching the Unit.
Static electricity may cause not only damage to the Unit, but may cause breaks in or a
loss of data.
Do not disconnect the communication cable during wireless
communication or LAN communication.
This may harmfully effect the Unit or your PC.
T&D cannot guarantee the Unit’s operation if it has been connected
to a PC using a USB hub or a USB extension cable.
Do not use or store the Unit in the following places:This may cause
electrocution, fire and/or other adverse effects to the Unit and/or
other surrounding devices.
Areas exposed to direct sunlight
This will cause the inside of the Unit to become overheated and may cause fire,
deformation, and/or other damage including malfunction.
Areas prone to strong magnetic fields
This may cause damage including malfunction.
Areas exposed to water leakage
This may cause electrocution or other damage including malfunction.
Areas exposed to static electricity.
This may cause damage including malfunction.
Areas exposed to excessive vibration
This may cause injury, malfunction, damage or loss of proper electrical contact.
Areas that are not flat or level
This may cause the Unit to fall and result in injury and/or damage.
Areas exposed to fire or overheating.
This may cause damage including malfunction and deformation.
Areas prone to fire, smoke, dust and dirt
This may cause damage including malfunction.