User's Manual

Registering Devices and Making Settings
33
Registering Devices and Making Settings
This section briefly explains in sequence what needs to be
done in order to carry out registration of devices and the
making of settings.
1.

Base Unit Settings
Before making initial settings please confirm the following:
Is the Unit connected to a PC with the USB cable?
Are the "POWER" and "ACTIVE" LED lamps on the Unit both lighted up?
Is the PC clock showing the correct date and time?
By opening the “RTR-500W Settings Utility” from the Applications
Menu, the settings window will automatically be opened.

Settings Items
Settings are made for the Base Unit Name, Unit of Temperature, LAN
Password, and so on
2. Remote Unit Registration
1. After having completed the Base Unit Settings, in the RTR-
500W Settings Utility, open the [Remote Unit Settings] Menu.
2. When the direction appears in the application window place the
Data Logger face down on top of the Base Unit to enable
optical communication.
Place the Data Logger (Remote Unit) face down on
the Base Unit connected PC via USB.
Optical Communication Area
USB Communication Cable
PC
which software has
been installed
Registration Items
Items that are registered into the Remote Unit include Group Name, Remote
Unit Name, Frequency Channel Settings, Recording Mode Settings, Warning
Monitoring Settings, Auto-Download Settings and so on.