User's Manual

Notes about Operation
37
Useful Features and Functions
Changing Settings during Operation
It is possible to make changes to settings by either connecting the Unit
to the same computer used when making the initial registration with a
USB cable or via a network connection.
When making changes to settings keep the following two points in mind.
- While the Unit is connected via USB cable to the PC, the processing of
recorded data (downloading / sending) as well as warning monitoring cannot
be carried out.
- When making changes via a network connection there are some items such
as Network Settings, LAN Password Changes or Initialization, which are
restricted from being changed.
Registering Remote Units via an RTR-500
It is possible to use an RTR-500 unit being used as a Repeater to
register additional Remote Units.This can be done by sending the
Remote Unit info for the unit you wish to add to the Base Unit over the
network to which it is connected.
Optical Communication
between an RTR-500
(Repeater) and a Remote Unit
USB
Communication Cable
PC
which software has
been installed.
Network
For details about operations please see the "Help" menu in the
"RTR-500W Settings Utility".