Instruction manual

Troubleshooting

Symptom Check

No sound Subwoofer connected to the mains lead.

Power is ON.

Your unit is connected to the LINE IN of the subwoofer.

Volume control.

Crossover.

Red LED not ON Power switch is in ON position.

Subwoofer fuse.

Mains plug fuse.

Please note you may hear a tone from the subwoofer when the power are

being switched OFF, this is normal and not a fault.

For your guidance.

Service

For further information or help, please visit our website:

www.tangent-audio.com

Before requesting service, please refer to the trouble-shooting guide above. To

obtain service please contact your local dealer.