Operation Manual

PS (Program Service name)

PTY (Program TYpe)

CT (Clock Time)

RT (Radio Text)

A) PS (Program Service Name)

Press the DISPLAY button on the remote until PS appears. The current stations name will be shown.

Note: NO PS will be shown if the signal from the radio station is not strong enough or no such service is

available.

B) PTY (Program Type)

Press the DISPLAY button on the remote until PTY appears. The current type of the program will be

shown.

Note: NO PTY will be shown if the signal from the radio station is not strong enough or no such service is

available.

C) CT (Clock - Time)

Press the DISPLAY button on the remote until WAITING CT will appear. The current time from the radio

Station will be shown, e.g. 15:30

Note:

1. The Clock - Time will be only transmitted from the radio stations once a minute, so you need to wait

for less than 1 minute to see the time.

2. NO CT will be shown if the signal from the radio station is not strong enough or no such service is

available.

D) RT (Radiotext)

Press the DISPLAY button on the remote until RT appears. The text message will start to scroll across the

display.

Note: NO RT will be shown if the signal from the radio station is not strong enough or no such service is

available.

PTY SEARCH (Program Type Search)

1. Press the PTY SEARCH button on the remote, PTY SEL will flash on the display.

2. Press the TUNING + /- on the remote to choose the program type, for example, NEWS, SPORT, etc.

3. Press the PTY SEARCH button again to choose the program type shown in the display. PTY SRH will be

shown on the display when a search is going on.

4. When the type of program is tuned in, it will stop searching, otherwise, NO FOUND will appear in the

display.