Operation Manual

• Press SELECT and the radio will scan for all available UPnP

servers. Note, this may take a few seconds for the radio to

complete its scan and before the scan has completed, the

radio will display ‘[Empty]’. The radio will continue to display

‘[Empty]’ if no UPnP servers are found.

• After a successful scan, select your UPnP server, by rotating

the knob if there is more than one UPnP server, and then

press SELECT (note, your radio will display ‘Access Denied’

at this stage).

4. Your PC will now prompt you that a device has attempted to connect to

your UPnP server. In order to allow the radio to have access to the

media files, you will need to click the ‘Library’ tab from Windows Media

Player 11 and select the ‘Media Sharing…’ item to open the ‘Media

Sharing’ window.

Selecting ‘Media Sharing…’ for Windows Media Player 11:

5. From the ‘Media Sharing’ window, the radio will be listed as an

unknown device. Click on the unknown device listed, then click the

‘Allow’ button and then click ‘OK’.