Operation Manual

Sending Measurement Data to Your Smartphone

When instructed to by the app, press and hold the “ ” button of

the Activity Monitor for two seconds or more.

“ ” is displayed after this, indicating that a connection can be made

within the next two minutes. (“ ” flashes during communication.)

The measurement data is sent to the Smartphone and “ ” turns off.

REQUEST

・Measured values are recorded to the memory once every hour on the hour. To ensure that accurate measure-

ment data is sent, we recommend that you do not send data within five minutes before or after the hour.

→ This may cause data loss if the clock of the Activity Monitor is not accurate.

・Try to send measurement data each day

→ The Activity Monitor can store 15 days of data (including the current day), but from the 16th day, the

oldest data is overwritten with the new data.

・Measurement data cannot be sent to multiple smartphones.

→ Data that has already been sent cannot be resent.

Collecting Your Measurement Data

TOP

“ ” Button

How to Use

If "Re-connection" is displayed in the app, tap it to operate

your device.

NOTE :

To cancel communication after “ ” is displayed, press and

hold the “ ” button for two seconds or more. To avoid data

loss, communication cannot be cancelled while data is being

sent (while “ ” is flashing).

If the connection fails, follow the steps above again.

Refer to each app for instructions on how to use the apps.

Select "Input Data" → "Steps" → "Input from device".

NOTE :