Operation Manual

If this occurs
Check this
Battery power is running low. The device cannot take measurements or communicate.
Replace the batteries (CR2032) as soon as possible.
Battery power is running low.
Replace the batteries (CR2032) as soon as possible.
The timing at which batteries are replaced may affect data storage.
Check "How to Use the Activity Monitor Correctly : Wearing" and
"How to Use the Activity Monitor Correctly : To Ensure Accurate Measurements".
flashes
Nothing is displayed even
when batteries are inserted
Too few/too many measured
values
"Running" may be counted if you walk down stairs at a quick pace.
"Running" has been counted even
though I
have not been running.
Are the batteries inserted in the correct orientation?
Check the + and - marks on the batteries.
Is flashing?
The communication function turns off when the batteries are running low.
Replace the batteries (CR2032).
Are the device and smartphone out of communication range?
The communication distance with the device is approximately 5 meters
in an unobstructed location.
Cannot connect the device and
smartphone.
or is displayed.
Is "Bluetooth" set to "On" in the smartphone "Settings"?
is displayed repeatedly.
is displayed.
Delete the device pairing from the smartphone in "Settings" > "Bluetooth",
and then pair with the device again.
, or is displayed.
A system error has occurred. Remove and reinsert the batteries.
is displayed
Are the setting details correct?
Check the personal settings in the dedicated app.
Battery power is running low. The device cannot communicate.
Replace the batteries (CR2032) as soon as possible.
Are the setting details correct?
Check the personal settings in the dedicated app.
is displayed.
Cannot connect the device and
smartphone. The device is reset and
is displayed.
The device may be reset during communication if the batteries are running low.
Replace the batteries (CR2032).
is displayed during use.
There may be a connection problem.
Remove and reinsert the batteries.
If this occurs frequently, the battery power may be running low.
Replace the batteries (CR2032).
If there are any other unusual items shown on the display, contact Tanita via www.tanita.eu
16
Troubleshooting
TOP
If Necessary