Owner's Manual

You can change the weight unit by using the switch on the back of the scale.

Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches.

Similarly, if kilograms is selected, height will be automatically set to centimeters.

Note:

•Afteryoureplacethebatteriesorifyouwanttoresetdateandtime,pressandholdtheArrow(recall)buttontobeginthedateand

time programming process. Replacing the batteries will cause the loss of date and time settings.

•60secondsormoreofinactivitywillcauseautomaticshutoffduringthisprocess.Nodatawillbesavedasaresult.

•Ifyoumakeamistakeorwishtoturntheunitoffbeforeyoucompletetheprogramming,presstheOFFbuttontoturntheunitoff.

No data will be saved as a result.

SETTING (RESETTING) DATE AND TIME

CHANGING THE WEIGHT MODE

Note: For use only with models containing the weight mode switch.

1. Set Date

Insert batteries into the scale and then press any button to

start the Year setting. Press the </> buttons to set year and

then press SET button. The unit will beep once to confirm.

2. Set Hour

Press </> buttons to set hour and then press SET button.

The unit will beep once to confirm.

3. Set Minute

Press </> buttons to set minute and then press SET.

The unit will beep twice to confirm the programming.

The power will then shut down automatically.