Owner's Manual

ManualsBrandsTanita ManualsScalesTanita WB-3000

Eng

ELECTRONIC PHYSICIAN SCALE

WB-3000

INSTRUCTION MANUAL

Please keep this manual in a safe place, and make

sure it is readily available whenever necessary.

Please use this product only after carefully reading

this manual and fully understanding its contents.



Summary of content (7 pages)

PAGE 1
Eng ELECTRONIC PHYSICIAN SCALE WB-3000 INSTRUCTION MANUAL Please keep this manual in a safe place, and make sure it is readily available whenever necessary. Please use this product only after carefully reading this manual and fully understanding its contents.
PAGE 2
. Safety Notes •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Eng 3 ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3 ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4 •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 5 4. Part Name & Accessories 5. Assembly Instructions 6.
PAGE 3
6. Set up 5. Assembly Instructions 1. List of Components Eng Base (fully assembled and pre-wired to display assembly) To obtain the highest level of accuracy, please make sure that all four (4) feet are touching Cable (Base side) on the floor evenly.
PAGE 4
9. Operation 1. Standard Weighing Procedures 3. Step on Function The scale will turn on automatically when the user steps onto the platform. key. Eng Eng 1) Turn on the power by pressing the d Note: •If the weight is less than 22lb/10kg, the “Step-On” function will not work. 2) After all the segments flash, [0.0lb/0.0kg] is displayed. •If person less than 22lb/10kg, press the key manually to turn on the scale.
PAGE 5
11. Output data format 10. Measuring height procedure Eng measurement. •RS-232C and USB interface are for data OUTPUT ONLY! Always have someone assist the user for accurate measurement. •This scale is not capable of receiving instructions from an external device. 1) Adjust the Height Rod Arm position before the user steps on the platform. Place Eng This section covers the exporting of data from the scale to an external device (e.g. PC) using a RS-232C and USB compliant signal.
PAGE 6
Output data Header kg mode Output data (ASCII code) lb mode Eng Control data {0 Fix to 16 2 Bytes fixed Control data ˜0 Fix to 1 1 Byte fixed Control data ˜1 Fix to 1 1 Byte fixed Control data ˜2 Fix to 1 1 Byte fixed "WB-3000" 9 Byte fixed Height Model Hm Hf xx.x 2 – 6 bytes Weight Wk Wp xxx.x 3 – 5 bytes MO BMI MI xxx.
PAGE 7
Eng USA and Canada Federal Communications Commission and Canadian ICES Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Canadian ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation.