CMS 3.0 REVOLUTION REINVENTED.
CMS 3.
In the early 1990s we took our studio-grade Dual ConcentricTM drivers and put them in the ceiling, giving birth to our legendary CMS (Ceiling Monitor System). Now we introduce the most significant design and acoustic development in over 20 years.
CMS 3.0 Series New technologies New Dual Concentric driver The Dual Concentric™ driver exhibits better harmonic alignment, the effect of which is to deliver a more natural sound with superb tonal balance and greater intelligibility. Propagating a spherical wave front aligned on all three axes, Tannoy’s point source driver delivers even dispersion into a wide listening field in both the horizontal and vertical planes.
New features As well as a completely new Dual Concentric driver design, the new CMS 3.0 range also features a host of mechanical and aesthetic changes that make the process of specifying, installing and commissioning easier than ever before, from new back cans or clamp designs to more convenient termination panels and a choice of grille fixings, from the classic bevelled edge to the new Arco Grille accessory. All in all, these changes help make CMS 3.
CMS 3.0 Series Applications Whether it’s in the pursuit of leisure and entertainment, learning, retail or the business world, investing in high quality audio components is crucial for the best results.
Restaurant / Entertainment Successful restaurants and other entertainment venues rely on many other factors rather than just the quality of the food. Better audio quality in any venue leads to more relaxed customers, where the right levels and clarity means they are more likely to spend longer in a bar or restaurant, typically spending more money as a result.
CMS 3.0 Series The full line up CMS 3.0 at a glance With a fundamental redesign of the Dual Concentric driver, the new CMS 3.0 range is our most advanced ceiling device ever produced, providing better clarity and wider dispersion, as well as a range of mounting options to suit any application. The available range means that whatever the challenges you face in an installation, CMS 3.0 will help overcome the limitations of the space.
MODEL VARIANTS CMS 403 Dual Concentric CMS 503 CMS 603 CMS 803 Blind Mount DC BM DC BM DC BM Pre Install DC PI DC PI DC P1 Low Profile DC LP Qcentric wave guide DCQ Eyeball ICT Models DCE Blind Mount ICT BM ICT BM Pre Install ICT PI ICT PI Low Profile ICT LP Eyeball ICTe Life Safety ICT LS SPECIFICATION OVERVIEW Model Dispersion Frequency Range (-10dB) CMS 403DCe 90 ° 80 Hz - 54 kHz CMS 403ICTe 90 ° - Sensitivity 80 Hz - 24 kHz 88 dB 40 Hz - 35kHz 88 dB Rated SPL (a
CMS 3.0 Series A systems approach CMS 3.0 utilizes a 16 ohm driver, making it ideal for use in high performance low-impedance systems (with optimized performance when used in conjunction with Lab.gruppen LUCIA amplifiers) powering 8 CMS 3.0 loudspeakers per channel. Ideal for use in high performance low-impedance systems External Volume Control External Source Select Source Combinations • 1 x Stereo • 2 x Mono With LUCIA, Lab.
CMS 3.0 - A measurable difference Off Axis Performance – Enhanced Constant Directivity (8” example) CMS 803 DC - On axis and 45 degrees off axis response. CMS 801 DC - On axis and 45 degrees off axis response. CMS 801DC in IEC BAFFLE 110.0 10 dB @ 10 kHz 98.0 CMS 803DC BM in IEC BAFFLE 110.0 4 dB @ 10 kHz 98.0 86.0 dB SPL dB SPL 86.0 74.0 74.0 62.0 62.0 50.0 20 50 100 200 500 1k 2k 5k 10k 50.
Tannoy adopts a policy of continuous improvement and product specification is subject to change. Dual Concentric is a trademark of Tannoy Limited. All other trademarks remain the property of their respective owners. Copyright (c) 2015 Music Group Innovation SC Ltd. All rights reserved. 6483 1278 / 251115 tannoypro.