Product Information Document

Product Information Document
5 of 10
Technical Specications
System
Frequency response (-3 dB)
(1)
58 Hz - 160 Hz
Frequency range (-10 dB)
(1)
42 Hz - 300 Hz
System sensitivity (1 W @ 1 m)
(2)
92 dB (1 W = 2.45 V for 8 Ohms)
Rated maximum SPL
(2)
112 dB (average) 118 dB (peak)
With THP60 110 dB (average)
Power handling (3)
Average 100 W
Programme 200 W
Peak 400 W
Recommended amplier power 200 W @ 8 Ohms
Nominal impedance 8 Ohms
Transformer taps (via front rotary switch)
70 V 60 W/30 W/15 W/7.5 W/OFF &
Low impedance operation
100 V 80 W/30 W/15 W/OFF &
Low impedance operation
Crossover Integral 2nd order passive, 160 Hz
Transducers
Low frequency 1x 200 mm (8.00") long throw woofer with
High frequency multi fibre paper pulp cone
Enclosure
Back can Zinc plated steel
Bae Reex loaded UL 94V-0 rated ABS
Grille Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure
for load bearing safety bondClamping
Design Security toggle clamp
Transducers
Backcan Options
Blind Mount (BM) Complete with xed back can
Cable Entry Options Cable clamp & squeeze connector for
conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions
19 / 22 / 28 mm (0.75 / 0.87 / 1.1")
Connectors Removable locking connector with
screw terminals with “loop through” facility
Safety agency ratings (pending) UL-1480, UL-2043, CE
BM hole cutout diameter 295 mm (11.61")
Dimensions
Bezel diameter 325 mm (12.80")
Front of ceiling to rear 310.5 mm (12.22")
of back can (BM)
Front of ceiling to top of 327.8 mm (12.90")
safety loop (BM)
Net Weight (ea)
CMS 801 BM 8.4 kg (18.48 lbs)
Included Accessories C Ring, tile bridge, paint mask,
cutout template, grille
Optional Accessories Plaster (Mud) Ring
(CMS 801 sub) Notes
(1) Average over stated bandwidth. Measured in an IEC bae in an Anechoic Chamber
(2) Unweighted pink noise input, measured in an IEC bae in an Anechoic Chamber. If the loudspeaker is placed in the ceiling near a
corner (
/2) an increase of 6 dB in sensitivity and maximum SPL can be realised.
(3) Long term power handling capacity as dened in EIA - 426B test A full range of measurements, performance data, and Ease™ Data
can be downloaded from tannoy.com
TANNOY operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will
always equal or exceed the published specications, which TANNOY reserves the right to alter without prior notice.
Please verify the latest specications when dealing with critical applications.
Ordering Information
Model name Baffle / Grille Colour Packed Quantity Packed weight kg (lbs)
CMS 801 SUB BM WHITE 2 20.2 (44.44)
8" Compact Ceiling Mounted Subwoofer for
Installation Applications (Blind Mount)
Install
CMS 801 SUB BM