Speaker Specifications

Di5
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: [e-mail]
E: [e-mail]
E: [e-mail]
E: [e-mail]
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Di5 data file // issue 1.06 // 14.01.08
TECHNICAL SPECIFICATIONS
F
requency Response (-3dB)
(
1)
9
0Hz - 25kHz
Frequency Range (-10dB)
(1)
80Hz - 30kHz
System Sensitivity (1W @1m)
(2)
88dB (1W = 2.45V for 6 Ohms)
Dispersion (-6dB) 90 degrees conical
D
river Complement
Low Frequency 1 x 110mm (4.50”)
Mineral loaded polypropylene
H
igh Frequency 25mm (1.00”) ICT™
C
rossover 7kHz Inductively coupled
Directivity Factor (Q) 5.3 averaged 1kHz to 10kHz
D
irectivity Index (DI) 6.6 averaged 1kHz to 10kHz
Rated Maximum SPL
(2)
Average 105dB
Peak 111dB
Power Handling
Average 50W
Programme 100W
Peak 200W
Recommended Amplifier Power 100W @ 6 Ohms
Nominal Impedance 6 Ohms
Di5t - Transformer Taps (top rotary switch)
70V 30W / 15W / 7.5W / 3.75W / OFF
& low impedance operation
100V 30W / 15W / 7.5W / OFF
& low impedance operation
Distortion
10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic
250Hz 2.00% 0.26%
1kHz 0.53% 0.19%
10kHz 2.5% 0.35%
1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic
250Hz 0.65% 0.09%
1kHz 0.144% 0.11%
10kHz 0.52% 0.298%
Enclosure High Impact Polystyrene (HIPS)
rated IP64 to EN60529 (IEC529)
Grille Steel, with weather resistant coating
Finish Textured black or white paint
(custom trim colours can be supplied pre-fitted
t
o special order - minimum order quantity applies)
Connectors Euroblock type removable locking connector with
screw terminals with "loop through" facility
F
ittings 1 x K-Ball™ bracket socket
2 x M8 yoke bracket inserts
S
upplied Yoke bracket
Accessories
Optional Pole mount adaptor
Accessories K-Ball™ pre-wired multi angle bracket
Dimensions 240.7 x 155 x 162mm (H x W x D)
(9.47 x 6.1 x 6.38”) (H x W x D)
NET Weight 2.7kg (5.94lbs)
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
System Di5 / Di5t
Construction
8001 4010 Di5 Black 2 3.0 (6.61lb)
8001 4011 Di5 White 2 3.0 (6.61lb)
8001 4020 Di5t Black 2 3.5kg (7.72lbs)
8001 4021 Di5t White 2 3.5kg (7.72lbs)
PART NUMBER PACKED WEIGHTPACKED
QUANTITY
COLOURMODEL NAME
Ordering Information