Specification Sheet

DVS 4 (EN54)
Technical Data Sheet
tannoypro.com
V 2.00 - 25/11/15
Specifications
Ordering Information
Part Number Colour
8001 7590 Black
8001 7591 White
Performance
System
DVS 4 (EN54)
Frequency response (-3 dB)
(1)
75 Hz - 20 kHz
Frequency range (-10 dB)
(1)
60 Hz - 30 kHz
Rated sensitivity (1 W, Lo Z)
(2)
84 dB
Sensitivity as per EN54
(4 M, through transformer)
(2)
70 dB
Directivity factor (Q)
6.5 averaged 1 kHz to 10 kHz
Directivity Index (DI)
5.3 averaged 1 kHz to 10 kHz
Power Handling
(3)
Average 40 W
Programme 80 W
Peak 160 W
Recommended Amplier Power
80 W @ 6 ohms
Nominal Impedance (Lo, Z)
6 ohms
Maximum SPL as per EN54
(4 M, through transformer)
(2)
84.8 dB
Rated maximum SPL (1 m, Lo Z)
(2)
Average 100 dB
Peak 106 dB
Transformer Taps (via front rotary switch)
70 V
30 W (165 Ω) / 15 W (330 Ω) / 7.5 W (660 Ω) / 3.75 W (1320 Ω) /
OFF & low impedance operation
100 V
30 W (330 Ω) / 15 W (660 Ω) / 7.5 W (1320 Ω) /
OFF & low impedance operation
Crossover Point
3.9 kHz - 2nd order LF, 2nd order HF
Coverage angles
(4)
Horizontal plane Vertical plane
500 Hz
360° 360°
1 kHz
151° 124°
2 kHz
113° 129°
4 kHz
142° 146°
Distortion
10% full power Harmonics
2nd 3rd
250 Hz
0.738% 0.772%
1 kHz
0.145% 0.234%
10 kHz
0.070% 0.070%
1% full power
250 Hz
0.320% 0.311%
1 kHz
0.078% 0.174%
10 kHz
0.087% 0.087%
Transducers
Low Frequency
100 mm (4.00”) mineral loaded cone material
High Frequency
19 mm (0.75”) coaxially mounted
Physical
Enclosure
ABS
Grille
Aluminium, Painted
Connectors
Removable locking connector with screw terminals with “loop through” facility
Transformer setting
Rotary switch
Dimensions (H x W x D)
277.0 x 170.4 x 165.6 mm
(10.91” x 6.71” x 6.52”)
Net Weight (ea)
1.8 kg (3.96 lbs)
Shipped weight
5.4 kg (11.9 lbs)
Included Accessories
Yoke bracket
Packed Quantity
2
Notes:
1. Average over stated bandwidth. Measured in
an IEC bafe in an Anechoic Chamber
2. Unweighted pink noise input, measured at
1 metre on axis
3. Long term power handling capacity as dened
in EIA - 426B test
4. The reference point for the reference axis
(on-axis) is the centre of the bafe. The
horizontal and vertical planes are dened with
the speaker mounted with the transformer
tapping selector at the bottom
A full range of measurements, performance data,
CLF and Ease™ Data for DVS 4 can be downloaded
from www.tannoypro.com. They also apply to the
DVS 4 (EN54).
Tannoy operates a policy of continuous research
and development. The introduction of new materials
or manufacturing methods will always equal or
exceed the publishing specications, which Tannoy
reserves the right to alter without prior notice. Please
verify the latest specications when dealing with
critical applications.
Copyright (c) 2015 Tannoy Limited. All rights reserved.
EN54
certified