Quick Start Guide

20 iW Series Quick Start Guide 21
Speaker Loading Volume (continued)
Option 2
Existing timber stud partition, or any other wall type constructed with a 102 mm (4 inch) cavity depth.
1. Many professional installers use a "doughnut' of compliant material, which can be inserted as a tight t between the two surfaces of the partition or into the
wall cavity. The length of the internal surface of the strip of material determines the 'enclosure' volume. For each model, cut the strips into lengths listed in the
table below, insert into the cavity, and join to form a ring that will ensure the correct volume - see Fig : 12
Model Length
iW4 DC 1380 mm (54")
iW 6DS 1570 mm (62")
iW 62DS 1920 mm (75 1/2")
iW 62S 1920 mm (75 1/2")
Doughnut of
Compliant material
Inside wall, viewed from rear
Fig 12: Stud partition or wall cavity, using compliant material
of appropriate thickness to create a tight seal
Rear of speaker
Rear of stud Rear of stud
iW4 DC Model Dimensions
5,0
[0.20]
84,0
[3.31]
238,0
[9.37]
159,0
[6.26]
201,0
[7.91]