Quick Start Guide

24 iW Series Quick Start Guide 25
iW 62S Model Dimensions
473,5
[18.64]
227,0
[8.94]
187,6
[7.39]
426,1
[16.77]
96,7
[3.81]
Technical Specications
iW 62S-WH iW 62DS-WH iW 6DS-WH iW 4DC-WH iW 62 BACKCAN
Performance
Frequency response
(±3 dB) (see note 3)
Passive: 29 Hz - 110 Hz;
Active: determined
by controller
70 Hz - 20 kHz 75 Hz - 20 kHz 88 Hz - 51 kHz
Frequency response
(-10 dB)
34 Hz - 20 kHz 36 Hz - 20 kHz 73 Hz - 54 kHz
Low frequency
alignment (-6 dB)
29 Hz 34 Hz 36 Hz 73 Hz
Power handling
(see note 1)
160 W continuous,
640 W peak
80 W continuous,
320 W peak
70 W continuous,
280 W peak
60 W continuous,
240 W peak
Recommended
amplier power
100 - 320 W (total) 20 - 160 W @ 8 Ω 20 - 140 W @ 8 Ω 20 - 120 W @ 8 Ω
System sensitivity
(see note 2)
94 dB (2.83 V @ 1 m) 92 dB (2.83 V @ 1 m) 89 dB (2.83 V @ 1 m) 88 dB (2.83 V @ 1 m)
Nominal impedance 4 Ω 8 Ω
Rated maximum SPL
116 dB continuous,
122 dB peak
111 dB continuous,
117 dB peak
107 dB continuous,
113 dB peak
106 dB continuous,
112 dB peak
Crossover
Passive, 2nd order
low-pass
Passive, 2nd order LF, 1st
and 2nd order band-pass
mid, 2nd order HF
Passive, 2nd order LF,
2nd order HF
Passive, 2nd order LF,
2nd order HF
Crossover point
Passive: 110 Hz; Active:
determined by controller
500 Hz, 1.5 kHz 1.7 kHz 1.7 kHz
Crossover HF
adjustment
NA ±1.5 dB ±1.5 dB NA
Transducers
High frequency
25 mm (1") 25-micron titanium dome,
neodymium magnet system
19 mm (0.75") titanium
dome, neodymium
magnet system
Low frequency 2 x 165 mm (6.5") multibre paper pulp cone
165 mm (6.5") multibre
paper pulp cone
100 mm (4.0") multibre
paper pulp mid bass cone
Wiring
Positive 1, positive 2,
negative 1, negative 2
Positive 1, positive 2
negative 1, negative 2
ground
Positive, negative,
ground
Positive, negative
Physical
Dimensions HWD
473.5 x 227 x 110.5 mm
(18.7 x 8.9 x 4.4")
473.5 x 227 x 92 mm
(18.6 x 8.9 x 3.6")
320 x 209 x 90 mm
(12.6 x 8.2 x 3.5")
238 x 159 x
91mm (9.4 x 6.3 x 3.6")
1200 x 451 x 97 mm
(47.2 x 17.8 x 3.8")
Mounting depth 102 mm (4") 99 mm (3.9") 88 mm (3.4")
Net weight 5.8 kg (12.8 lb) 4.2 kg (9.3 lb) 2.2 kg (4.9 lb) 1.3 kg (2.9 lb) 8.6 kg (19.0 lb)
Construction Bae panel: moulded UV Resistant ABS, Clamps: moulded polycarbonate Cabinet panel: SECC
Finish White, paintable
Grille Powder coated perforated steel
Notes:
1. Long-term power handling capacity as dened in IEC standard IEC268-5
2. Averaged over specied bandwidth for half space environment. For anechoic conditions the gure is to be decreased by 3 dB
3. ± 3dB, measured at 1 metre in anechoic chamber in a critically tuned enclosure.
4. Remove links when bi-amping or bi-wiring
5. Remove links in stereo operation