Specification Sheet

Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: [e-mail]
E: [e-mail]
E: [e-mail]
E: [e-mail]
POWERVS10 BP
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERVS10 BP data file // Issue: 1.06 // 15.01.08
The Tannoy POWERVS10 BP is a compact, versatile bandpass subwoofer system,
designed to extend the low frequency response and increase system headroom of
POWERV Series loudspeakers. Extending the frequency response of these systems to
below 40Hz this highly efficient design is capable of providing output levels normally
associated with considerably larger enclosures.
A system suited to background music playback in applications ranging from clubs, bars
and cafes, right through to theatres and AV presentations. The POWERVS10 BP utilises
a single high efficiency 250mm (10.00”) drive unit in a compact and sturdy, black or white
painted MDF cabinet. The design concept also allows discreet placement, for instance
unobtrusively incorporated into fixed furnishings such as underneath seating or the bar in
cafes and bars. The install placement is made even easier as the design incorporates
moveable bass port tubes and blanking plates that can be swapped from the side to the
end panel, allowing the unit to be installed in various orientations. M10 rigging points are
also provided to allow permanent installation.
Delivering impressive levels of accuracy and performance, the POWERVS10 BP is
equipped with a highly efficient, flexible and reliable Class D power amplifier incorporating
a switching power supply. The amplifier section and power supply were developed
simultaneously and therefore optimally matched to minimise noise and enhance stability.
The power module combines light, efficient and cool-running amplification, comprehensive
driver protection and equalisation into a single compact unit. Clean, undistorted sound is
delivered, even when driven at very high power levels. No cooling fans are required so the
system runs quietly and is not prone to internal dust contamination.
All signal processing functions have been precisely tailored; crossover frequencies and
slopes, EQ, phase corrections and limiting. LED’s on the rear panel indicate signal
presence, signal activity, and power. Signal input and audio link are via XLR, while the
mains connector is a Neutrik locking Powercon type. The full range POWERVS models
have a high pass mode that enables a simple top box and subwoofer combination to be
created without the need for an external crossover. Two low pass setting options on the
subwoofer amplifier fully optimise integration with the full range units.
Available in black or white, this versatile powered subwoofer also has, due to effective
acoustic matching to the other POWERVS models, a wide range of uses in fully integrated
installations as diverse as theme bars, performing arts centres, high quality public address,
theme parks, leisure venues, audio visual, houses of worship and ‘dry hire’ rental.
Product Description
• 250mm (10.00”) drive unit
• Compact and versatile enclosure with convenient
aspect ratio
• Rugged, highly efficient Class D amplification with
universal power supply
• High power output
• Integral carry handles
• Rugged MDF construction finished with textured
black paint
• Port and blanking plate swap facility optimises
installation flexibility
• Background and foreground music playback
• Ideal for discreet placement in confined areas
• Performing arts venues
• Bars and clubs
• Restaurants, cafes and retail premises
• Theatres
• AV Presentations
• ‘Dry hire’ rental
Features
Applications
Power_V10_BP_Data_File_DJ_amends1.qxp:Layout 1 25/10/10 16:51 Page 1