TS2 SUB owner’s manual
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
STRONG MAGNETIC FIELD Due to the powerful drive unit magnet, do not place within 1 metre (3 foot) of a cathode ray tube (CRT) television or monitor. There is no issue with plasma and LCD devices. FCC INFORMATION (USA ONLY) CAUTION: Any change or modification to this unit could void your authority to operate this equipment, granted by the FCC. This apparatus has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC rules.
INTRODUCTION Thank you for selecting Tannoy loudspeakers developed in the UK by our dedicated team of design engineers. They are the choice of discriminating music lovers the world over. Musical excellence is designed into our loudspeakers from the start. Careful selection of the very best components combined with strict quality control procedures in the production process ensures this level of excellence is maintained.
CONNECTING TO YOUR SYSTEM ALWAYS MAKE AND CHECK ALL CONNECTIONS BEFORE PLUGGING THE SUBWOOFER INTO THE MAINS. FOR LINE LEVEL CONNECTION For use with an AV receiver or DVD receiver, connect a screened phono cable from the receiver SUB output to the L/LFE low level phono input on the rear of the subwoofer.
REAR PANEL LAYOUT TS2.10 REAR PANEL LAYOUT TS2.
TECHNICAL SPECIFICATIONS TS2.10 TS2.12 Output Power 300W RMS 500W RMS Low Frequency Response (-6dB) (Typical In Room) 24Hz 21Hz Inputs 2 x Phono Line Level, LFE or stereo Outputs 2 x Phono Line Level, LFE or stereo Input Filter Driver Type 50- 150Hz, 2nd Order Low Pass, with BYPASS Provision 250mm (10”) Active & Passive ABR Enclosure Type Enclosure Volume 300mm (12”) Active & Passive ABR Closed Box, Side Firing 23.1 litre (0.82 cu. ft.) 37.5 litre (1.32 cu. ft.
T: 00 44 (0) 1236 420199 T: 00 49 (180) 1111 881 T: 00 45 8742 7000 T: 00 1 (519) 745 1158 E: enquiries@tannoy.com E: anfragen@tannoy.com E: info@tcgroup-international.com E: info@tcgroup-americas.com Tannoy adopts a policy of continuous improvement and product specification is subject to change.
