Operation Manual

8. Software Installation
20
VSXNET Subwoofer Operation Manual rev 2.0.0
8.1 Updating Firmware
Occasionallyitmaybenecessarytoupdatethedevicesrmware(withleextension.dfw);thismaybedueto
addedfeaturesoramendmentstotheVNETproduct.Checkwithyourdealer/distributoror(www.tannoypro.com)
foranyapplicableupdates.
Firmwarecanbeupdatedoverthenetwork(noneedtodisconnectspeakersfromthenetwork).
ArmwareupdatewillbecommontoallVNETproducts(oneleforallmodels).
Updatingadevicesrmwareisstraightforward:-
1. Downloadandsavethenewrmwareletodisk.
2. Fromthetoolbarselect‘Device’&‘Start Firmware’Loader.
3. Thefollowingmessagewillappear.








4. Click‘OK’.
5. Browsetothenewrmwarele&select.Thefollowingmessagewillappearstatingtheoldversionnumber
 &thereplacementversionnumber.








6. Click‘OK’.
7. Inorderforthenewrmwaretotakeeffecttheunithastobeswitchedoff&backonagain.Thiscanbe
 doneautomaticallyaftertheupdate.Click‘OK’toconrm.










