VXNET SERIES Professional Ioudspeakers Quick Start Guide
Introduction Designed and engineered by Tannoy, the VXNET Series comprises a range of powered (active) loudspeakers for demanding professional and commercial sound applications. Each incorporates acclaimed Dual Concentric driver technology in tandem with on-board powering VNET power module. This Quick Start Guide presents only the essential information required to properly unpack, connect and place the unit in operation.
Unpacking and Visual Checks System Configuration Every Tannoy VXNET product is carefully tested and inspected before being packaged and leaving the factory. After unpacking your loudspeaker, please inspect for any exterior physical damage, and save the carton and any relevant packaging materials in case the loudspeaker again requires packing and shipping. In the event that damage has been sustained in transit, please notify your dealer immediately.
LED Functions Gain Structure and Limiting Limit LED - When illuminated this indicates that the system is approaching clipping. An occasional flicker of the red LED on the loudest peaks is acceptable. If this LED remains red for more than the duration of brief dynamic peaks, or lights continuously then the system is being overdriven. If the red LED illuminates excessively: The VXNET gain structure is designed to allow a lowlevel source device to drive the loudspeaker to full output.
