User's Manual

Page
12
Default Schedule
The thermostat’s Schedule is factory programmed in accordance with EnergyStar guidelines which
define the START TIMES and SETPOINTS listed below (Note that a SETPOINT is defined by a
NAME, and HEAT & COOL temperatures). The thermostat anticipates the time required to reach a
desired temperature prior to the start of the SETPOINT time; therefore, you only need to set the
desired time for the SETPOINT temperature.
SCHEDULE
Mon. to Fri. Sat. & Sun.
SETPOINT SETPOINT
START
TIMES
NAME HEAT COOL
START
TIMES
NAME HEAT COOL
6:00 am Wake 70°F (21°C) 78°F (26°C)
8:00 am Leave 62°F (17°C) 85°F (29°C)
8:00 am Wake 70°F (21°C) 78°F (26°C)
6:00 pm Return 70°F (21°C) 78°F (26°C)
10:00 pm Sleep 62°F (17°C) 82°F (28°C)
11:00 pm Sleep 62°F (17°C) 82°F (28°C)