User's Manual

Page
27
During the Conserve Mode you will only be able to modify the following parameters:
Language
24 hour Time Format
Change Filter Reminder
Contact Information
Exit from User Conserve Mode
To exit the User Conserve Mode, press the Conserve Button again and the thermostat will go back
to its regular schedule or applicable HOLD. The Green Conserve Status light will turn OFF.
When the thermostat exits the User Conserve Mode, it enters the Normal Operation Mode, w here
the SETPOINTs are as programmed by the Schedule or HOLD and you are able again to modify
any configuration parameter of the thermostat.