User's Manual

Page
28
Utility Conserve Mode
If your utility offers a energy reduction plan and you are enrolled in the program, your utility can
start a Utility Conserve Mode. This allows your utility to send a signal over the communications link
to increment the temperature a few degrees (when using the cooling system) or decrement it a few
degrees (when using the heating system).
If a temporary HOLD or the current scheduled SETPOINT expires, the incremental temperature
change is applied to the next scheduled SETPOINT.
At this point, the thermostat will set back the current SETPOINT
(HOLD or scheduled SETPOINT) by a fixed value of 2°C to
conserve energy. The SETPOINT’s name at the Home Screen of
the thermostat will be replaced by a label showing “Conserve”.
When entering a Utility Conserve Mode, your thermostat will show
the word “UTILITY” under the room temperature and the Conserve
Status Light turns on Amber