User's Manual

Proprietary and Confidential 2006.02.08
12
2.5.3 TC-1216/TC-1116 Meter Module (Itron CENTRON)
Note: The TC-1216 meter module is used for 240 volt service and the TC-1116 meter module is used for 120 volt service.
The installation and retrofit procedure is the same for each of these meter types.
1. Remove the glass or polycarbonate lid from the CENTRON meter.
2. Remove the grey cover from the base of the CENTRON meter.
3. Connect the IR serial interface adapter sticking through the base of the CENTRON meter to the Tantalus module.
Take care to align the mating keys on the connector to the slots on the socket.
Figure 14: CENTRON Meter Base and TC-1216/TC-1116 module
4. Snap the TC-1216/TC-1116 module onto the base of the CENTRON meter. Ensure that the Tantalus module is held
firmly in place by the plastic latches on the left and right side of the unit.
Figure 15: CENTRON Meter Base with TC-1216/TC-1116 Installed