User's Manual

Proprietary and Confidential 2006.02.08

1.4 Required tools and materials

The following Tantalus tools are required:

• DJ-100, Tantalus drill alignment jig and 3/8” drill bit with stop

• DT-150, Tantalus meter programming software

• DT-100, Tantalus optical programming fixture including DC power adapter 6 – 8 VDC

• DT-116, Tantalus programming key (for use with the TC-1216/TC-1116 meter only)

• Disk marking template (electromechanical meters only)

• Disk marking paint pen (electromechanical meters only)

The following generic hand tools and materials are required:

• Electric hand drill

• Needle nose pliers

• Diagonal cutters

• #2 Phillips screwdriver

• Rubbing alcohol

• Soft cloth or paper towels

• Anti-static wrist strap

• Windows

compatible computer for programming meter module

• 240VAC meter socket for powering the meter and module during programming

Caution!

The Tantalus meter modules contain electrostatic sensitive devices. Working with the modules

should be done at a protected workstation. Persons handling the modules should be grounded with

an ESD wrist strap. When removed from the packaging the modules should be placed on antistatic

foam. When handling the modules hold the module only by the edges of the plastic holder.