User's Manual

100*75mm 80g
SURROUND WIRELESS EARBUDS
USER MANUAL
AF-BH011
EN
SAETY INSTRUCTIONS
Please read the instructions thoroughly before using this product and retain it for futrre
reference.
•
• Do not use abrasive cleaning solvents to clean it.
Do not expose the earbuds to liquids, moisture or humidity.
• Remove and clean the ear tips regularly.
• Do not expose the earbuds to extremely high or low temperatures as this may damage the
battery or deform the plastic parts.
• Do not throw the earbuds in a fire or dispose casually.
• Do not try to disassemble the earbuds. No user serviceable parts inside.
• Try not to drop the earbuds or apply any force to the earbuds.
• Charge the earbuds from 5V USB ports such as phone chargers or computers.
• Do not use earbuds in thunderstorm to avoid malfunction or electric shock.
• Never listen to music at high volumes, or you may permanently damage your hearing.
• Never wear earbuds while riding, driving or walking in traffic. Always stay aware of your
surroundings.
• Always ask a professional technician or authorized personnel for repair.
PACKAGE CONTENTS
1*SURROUND WIRELESS EARBUDS
1*Type-C Charging Cable
6*Ear Tips
1*User Manual
Microphone
Type-C port
Volume + Button LED indicators
MFB Button
Volume - Button Game Mode Button
Ear Tip
KNOWING YOUR EARBUDS
Accessories
Ear �ps Type-C Charging Cable User Manual (One pair equipped)
SETTING UP YOUR EARBUDS
Charging
We highly recommend that you fully charge the earbuds before using them for the first time.
1. Unplug the silicone cover on the charging port.
2. Plug in the Type-C cable to the charging port.
3. Connect to power supply and it will start charging automatically.
Power ON/OFF
USING YOUR EARBUDS
Bluetooth Caution
• Place the two devices to be connected close to each other and turn off other Bluetooth
devices.
• The maximum effective Bluetooth range may vary with the environmental circumstances.
Obstacles (walls, fences, etc.) between the two devices may shorten the effective range.
Bluetooth Pairing
1. When the headset is not connected to the device, it will directly enter the pairing mode
when it is turned on
2. Disconnect the phone, the headset goes directly into pairing mode
3. When the device is already connected, press and hold the Vol+ and Vol- buttons for 1
second to disconnect, and the Bluetooth will automatically enter the pairing mode
Status Indicator
ON
Press MFB BUTTON for 2 seconds
OFF
Press MFB BUTTON for 3 seconds
Indicator
Charging The red light long on
Fully Charged The white light long on
Note:
• To pair with another Bluetooth device, deactivate the Bluetooth function on the paired
device, connect with a new device and turn on Bluetooth of the original device .
Pairing: Blinking White/Red Alternately
Connected: The white light flashes every 10 seconds
Note:
• Each time you power on your earbuds, it will automatically connect to your last successfully
connected device if available within the Bluetooth range.
Controls and Functions
Previous Track
Press Vol - for 1 seconds
Next Track
Press Vol + for 1 seconds
Volume Down
Single press Vol -
Volume Up
Single press Vol +
Play / Pause
Single press MFB button
Answer Call
Single press MFB button
Hang Up
Single press MFB button
(during calling)
Reject Call
Two click MFB button
Voice Assistant
Two click MFB button
Gaming Mode
Single press G button
User
Manual
MFB Button
Type-C port
FCC COMPLIANCE
CLEANING AND MAINTENANCE
Wipe only with a dry, soft cotton swab or equivalent. Never insert anything into
the nozzle.
Remove the ear tips and rinse with a mild detergent and water. Thoroughly dry
before reattaching to your earbuds.
 Clean the ear tips and ear hooks regularly.
 Keep away from sharp objects to avoid scratches.
 Place in a dry and shady place if it is to be idle for along time.
 DO NOT clean with detergent or chemicals.
Rev_1.0
Email: [e-mail]
Guangdong,China
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in aresidential installation. This equipment generates uses and can radiate radio
requency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
WEEE COMPLIANCE
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems) Thi
s marking on the product,
accessories or literature indicates that the product and its electronic accessories should not be
disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources. Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where and how they can
take these items for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.