User Instructions

3.Bluetooth setting
1,Hold 3s to turn on bluetooth,the indicator light 250ms flashes rapidly and enters
the pairing mode. After holding 3s, it enters standby mode. It will automatically
turns off after 7 minutes in standby mode.The blue light will turn off after lighting
1s. If there is a trigger button in standby mode, then go back to the pairing mode
and will restart the counting time again.
2,If the phone has been paired before, it will be preferred to connect the phone
that has been paired before(the phone that has been paired last time)
3,After successful pairing, the blue light shines for 2s then light off
4,Hold 3s to turn off, the blue light shines for 1s then light off
5,Press and hold the button to keep the light on. Release the light and it will go
out instantly.
6,If bluetooth is turned off after pairing successfully with the mobile phone, the
indicator light 250ms flashes rapidly and enters the pairing mode. After 3s, it
enters standby mode. after 7min, it will be shut off automatically, and the blue
light shines for 1s then light off.If the phone turns on Bluetooth again under the
pairing mode, it will automatically connect back, and the bluetooth shines 2S will
be light off! If phone’s bluetooth is turn on under the standby mode, the button
needs to be triggered to wake up the remote control bluetooth and automatically connect
back after awakening.
Note: Blue light does not turn on when the Bluetooth is off.
Anytime the pairing is successfully paired, the bluetooth light shines 2s then light
off.