Specification

Concrete Anchors
Pick the correct drill bit diameter
by matching the color stripes
on the packaging.
5/32" Drill Bit
for
3/16"
Tapcons
3/16" Drill Bit
for
1/4"
Tapcons
Tapcon
Drill Bits
Torque adjusted driver prevents
over-torquing anchor heads.
Drill hole.
Drive anchor.
Slide Condrive
sleeve over
drill bit.
Tapcon Installation Accessories
Tapcon concrete anchors are designed to work as a part of a system. The system includes the Condrive
®
Installation Tool, the carbide tipped Tapcon
®
Drill Bit, and the Tapcon
®
anchor. For consistent performance,
it is recommended to use the entire system.
• Ensure the precise drilling of pilot holes when installing
Tapcon anchors.
• Masonry drill bits with a carbide tip.
• Tapcon drill bits are sold separately and are also
included in the large packages of anchors (at select
stores only).
• Colorstripe on drill bit
package corresponds
to Tapcon Packaging.
-For installing 1/4"
Tapcon fasteners,
use a 3/16" Tapcon
drill bit (Green Stripe)
-For installing 3/16"
Tapcon fasteners,
use a 5/32" Tapcon
drill bit (Red Stripe)
Condrive 500
Installation
Tool
3-1/2"
3-1/2"
0 to 1/4"
1/4" to 3/4"
1-1/4"
1-3/4"
Fixture
Thickness
Recommended
Anchor Length
Drill Bit
Length
4-1/2"3/4" to 1-1/4" 2-1/4"
4-1/2"1-1/4" to 3-1/4" 2-3/4"
5-1/2"1-3/4" to 2-1/4" 3-1/4"
5-1/2"2-1/4" to 2-3/4" 3-3/4"
5-1/2"2-1/2" to 3" 4"
• Makes installation of
Tapcon
®
Concrete
Anchors easy, fast,
and accurate.
• Designed for use
with a hammer drill
and Tapcon drill bits.
• Eliminates the need
for two drills or extra
nut drivers.
• Installs both head styles and all lengths of Tapcons.
• Tool drives 3/16” and 1/4” diameter Tapcons.
Drill
Slide
Drive