Instruction Manual

ManualsBrandsTapeTech ManualsTools07TT EasyClean Automatic Taper

Operation and Maintenance Guide

1380 Beverage Drive, Suite W

Stone Mountain, GA 30083

1-800-426-6256 | 770-243-2321

Better – Faster – Every time

Updated 10 2014

www.tapetech.com

EasyClean® Automatic Taper

Model: 07TT

TUBE PROTECTOR

ADJUSTABLE BRAKE LEVER

Decrease resistance

Increase resistance

MAIN TUBE

SPOOL

CONTROL TUBE

Summary of content (4 pages)

PAGE 1
EasyClean® Automatic Taper 1380 Beverage Drive, Suite W Stone Mountain, GA 30083 1-800-426-6256 | 770-243-2321 Operation and Maintenance Guide Better – Faster – Every time Model: 07TT CONTROL TUBE TUBE PROTECTOR MAIN TUBE SPOOL ADJUSTABLE BRAKE LEVER Increase resistance Decrease resistance Updated 10 2014 www.tapetech.com © 2014 TapeTech Tool Co.
PAGE 2
EasyClean® Automatic Taper Operation and Maintenance Guide Better – Faster – Every time 1380 Beverage Drive, Suite W Stone Mountain, GA 30083 1-800-426-6256 | 770-243-2321 CREASER LEVER Model: 07TT KEEPER WIRE MAIN TUBE SPOOL MOUNT CONTROL TUBE FLANGE CUTTER SPRING KEY RING CONTROL TUBE CONTROL ARM Updated 10 2014 www.tapetech.com © 2014 TapeTech Tool Co.
PAGE 3
EasyClean® Automatic Taper 1380 Beverage Drive, Suite W Stone Mountain, GA 30083 1-800-426-6256 | 770-243-2321 Operation and Maintenance Guide Better – Faster – Every time Model: 07TT Operation The automatic taper simultaneously applies tape and joint compound to any joint: walls, corners, and ceilings. It automatically dispenses the correct amount of joint compound under the tape, regardless of the tool user’s speed. The automatic taper uses tape 2 1/16” to 2 ⅛” (52-54 mm) wide.
PAGE 4
EasyClean® Automatic Taper 1380 Beverage Drive, Suite W Stone Mountain, GA 30083 1-800-426-6256 | 770-243-2321 Operation and Maintenance Guide Better – Faster – Every time To tape inside angle joints, both wheels must run in contact with the adjacent wall surfaces, bisecting the angle with the automatic taper. Tracking must be in a straight line with the creaser wheel extended, using the trigger located near the trailing end of the automatic taper.