User guide

Operation and Maintenance Guide

1380 Beverage Drive, Suite W

Stone Mountain, GA 30083

1-800-426-6256 | 678-892-2323

Better – Faster – Every time

Updated 04 2012

www.tapetech.com

Operation

The Mud Head is designed to place a consistently wide ribbon of joint

compound to each side of the internal or external corner for installation of

paper tape or corner bead.

Snap the Mud Head onto the corner applicator or MudRunner® and fill it with

joint compound. Start at one end of the corner and apply pressure to the corner

applicator or MudRunner™ to start the flow of compound while moving the tool

along the corner to the opposite end. Now apply the tape or corner bead.

Maintenance

Clean thoroughly with brush and water (or water hose) to remove all joint compound from the tool.

After the tool is clean, lightly oil with Ames® Bazooka® Oil or any light machine oil.

Mud Heads

Models: 16TT & 16TT90