Owner manual

Operation and Maintenance Guide

1380 Beverage Drive, Suite W

Stone Mountain, GA 30083

1-800-426-6256 | 678-892-2323

Better – Faster – Every time

Updated 04 2012

www.tapetech.com

Corner Finisher

Models: 40TT & 45TT

On models 48TT and 48XTT Only

NOSE or BULLET

PAGE 1
Corner Finisher Operation and Maintenance Guide Better – Faster – Every time 1380 Beverage Drive, Suite W Stone Mountain, GA 30083 1-800-426-6256 | 678-892-2323 Models: 40TT & 45TT On models 48TT and 48XTT Only NOSE or BULLET NOSE or BULLET On models 48TT and 48XTT Only Updated 04 2012 www.tapetech.com © 2012 TapeTech Tool Co.
PAGE 2
Corner Finisher Operation and Maintenance Guide Better – Faster – Every time 1380 Beverage Drive, Suite W Stone Mountain, GA 30083 1-800-426-6256 | 678-892-2323 Models: 40TT & 45TT Operation The 2” and 3” corner finishers (models 40TT and 45TT) are designed to wipe down and feather both sides of an internal corner in one pass. They are used to follow the Corner Roller and wipe down excess compound left when the tape is embedded into the corner.