User Manual

11. The box slide controller is then wrapped around the handle with the

extended portion of the transmitter closest to the brake lever grip.

12. The box slide controller should securely snap in place over the shape

of the handle and can either be locked into place or allowed to slide

freely by adjusting the locking nut on the top side.

18. Similarly, the crown is controlled with the dial as on existing ATF type

boxes.

13. The box must be at least partially filled with compound before it will

finish properly.

14. Hold the handle so that the material outlet is visible and facing

upward and depress one of the box slide controller triggers to start

the flow of mud.

15. Joint compound must flow through the hose and into and through

the handle, so the box may not begin to fill immediately.

16. Fill the box so that it is 50-70% full of compound before beginning to

use.

17. Operation of the brake system to orient and lock the box in place are

just as with other existing ATF type handles.

FLAT FINISHER BOX (cont’d)

The box slide controller brake

allows the controller to be

positioned on the handle

Same crown adjustment

dial as on traditional

Ames® box