User Manual

The taping process using the Bazooka® Continuous Flow Taper.

There are three important facts you should remember about the Bazooka® Continuous Flow Taper:

• Current automatic taper users can move up to Bazooka® Continuous Flow with minimal training – the tools are

almost identical!

• It simultaneously applies tape and joint compound to any wall joint and will cut the tape to the desired length.

• Unlike traditional tapers that must be loaded and reloaded using a hand pump, Bazooka® Continuous Flow can

work continuously without having to stop and reload.

GENERAL:

1. The Bazooka® Continuous Flow Taper is designed to work with tape that is 2-1/16 to 2-1/8” wide. Wider tape will

bind and narrower tape may have a tendency to jam.

BAZOOKA®

2. The taper is used in conjunction with the inline mechanical valve.

3. Connect them by installing the quick disconnect pilot fitting into the

connection on the end of the taper.

Attach taper to inline

mechanical valve