User's Manual

14
VUE DE FACE
VUE DE DESSOUS
Aperçu
Indicateur
de statut
Détecteur
d’empreinte
digitale
Bouton
d’alimentation
Port de
charge
11
Morse code is a backup access mode. It allows
you to unlock your device using long / short
combinations of pressing down on the shackle of
the lock (power button). Morse code allows access
to your lock without your fi ngerprint or your phone.
Follow instructions in the Tapplock app to setup
your custom Morse code.
Press down on the power button three (3) times to
enter Morse code mode. The status indicator light
should be green.
If you are having trouble getting to Morse code
mode, hold down the power button until the status
indicator light turns off, putting your lock in sleep
mode. Then press down on the power button three
times until the status indicator light turns green.
Morse code Mode