Tapplock one User Manual World’s first smart fingerprint padlock Tapplock.
Cutting-edge fingerprint technology • • • Unlocks in 0.8 seconds Stores up to 500 fingerprint Adaptive algorithm: faster and more accurate access each time you use it Shareable wireless access • • • Supports wireless Bluetooth access via the Tapplock app. Share & control access remotely to unlimited users, View access history with time and location.
Rechargeable battery • • Up to one year battery life per 2 hours charge time Check remaining power using the Tapplock app Unbreakable durability • • Zamak 3 zinc alloy metal body with cut-resistant stainless steel shackle Double-layered design with anti-shim and anti-pry capabilities makes Tapplock virtually unbreakable Morse code backup access • Setup morse code access using the power button in case a user's fingerprint isn't enrolled and the phone ran out of batteries.
Overview Status indicator Fingerprint sensor Power / mode button Charge port
Quick start 1. Download the Tapplock app from Google Playstore or iOS App Store 2.
3 ways to unlock Tapplock one is equipped with multiple access capability to allow for maximum convenience and flexibility. Fingerprint access: 0.
Fingerprint Mode Status Indicator Power Button • To turn on Tapplock, press the Power Button located below the rim. The Status Indicator light should be white, and your Tapplock should be ready to unlock with your fingerprint. (If you are having trouble getting to Fingerprint Mode, hold down the Power Button until the Status Indicator light turns off, putting your lock in sleep mode.
Bluetooth Mode Status Indicator Power Button • Connect your phone using the Bluetooth Mode to: • Add new Tapplock to your account • Unlock with your phone • Setup / remove fingerprints • Setup morse code • Press the Power Button twice (2) to enter Bluetooth Mode for phone pairing. The Status Indicator light should be blue. (If you are having trouble getting to Bluetooth Mode, hold down the Power Button until the Status Indicator light turns off, putting your lock in sleep mode.
Morse-code Instructions Status Indicator Power Button • Morse-code is a backup access mode. It allows you to unlock your device using long / short combinations of pressing the Power Button. Morse-code allows access to your lock without your fingerprint or your phone. • Follow instructions in the Tapplock app to setup your custom morse-code • Press the Power Button three (3) times to enter Morse Code mode. The Status Indicator light should be green.
Status Indicator The status indicator is the visual cue to understanding your Tapplock one. Refer to table below to understand what each color means.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
FCC notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Visit Tapplock.com for newest updates, instructions and FAQ. Contact us by emailing: reception@tapplock.
Copyright © Tapplock Corp.
