Installation Sheet

100
1500
bar
200
R
U
L
LEFT
USE NO OIL
500
psi
3000
2500
150
1000
2000
50
INTEGRAL SAFETY DEVICE
D
B
E A
C
NITROGEN
8
120
psi
140
10
6
80
4
40
20
60
160
100
2
bar
R
LR
TO PRODUCT
CONTAINER
NITROGEN
SAFETY FIRST
How to Install a Nitrogen Regulator or
Replace an Empty Nitrogen Cylinder.
1.
close cylinder valve "A". Then proceed with step 2.
Unscrew (counter clockwise) regulator key "B" as 2.
far out as it will go. (The regulator is now in the off
position).
Remove regulator from empty 3.
cylinder at "E".
Remove dust cap from new 4.
cylinder at "E". Open and close
valve "A" quickly to blow
dust from outlet.
With cylinder valve "A" in closed 5.
position, re-attach regulator to
cylinder at "E".
Open valve "A" all the way. 6.
(This is important because
this cylinder valve seals in
two places).
Make certain outlet is closed 7.
at "C".
Screw regulator key "B" in 8.
(clockwise) until required
pressure is reached "D".
Open outlet valve "C". 9.
A nitrogen cylinder contains extremely high
pressure regardless of size, and therefore,
should be handled with care!
FOR PROPER CYLINDER HANDLING PROCEDURE SEE REVERSE SIDE
100
1500
bar
200
R
U
L
LEFT
USE NO OIL
500
psi
3000
2500
150
1000
2000
50
INTEGRAL SAFETY DEVICE
D
B
E A
C
8
120
psi
140
10
6
80
4
40
20
60
160
100
2
bar
R
LR
TO PRODUCT
CONTAINER
SAFETY FIRST
IS 740-33-NIT
POSK10012 293
IS 740-33-NIT
POSK10012 293
NITROGEN
NITROGEN
How to Install a Nitrogen Regulator or
Replace an Empty Nitrogen Cylinder.
1.
close cylinder valve "A". Then proceed with step 2.
Unscrew (counter clockwise) regulator key "B" as 2.
far out as it will go. (The regulator is now in the off
position).
Remove regulator from empty 3.
cylinder at "E".
Remove dust cap from new 4.
cylinder at "E". Open and close
valve "A" quickly to blow
dust from outlet.
With cylinder valve "A" in closed 5.
position, re-attach regulator to
cylinder at "E".
Open valve "A" all the way. 6.
(This is important because
this cylinder valve seals in
two places).
Make certain outlet is closed 7.
at "C".
Screw regulator key "B" in 8.
(clockwise) until required
pressure is reached "D".
Open outlet valve "C". 9.
A nitrogen cylinder contains extremely high
pressure regardless of size, and therefore,
should be handled with care!
FOR PROPER CYLINDER HANDLING PROCEDURE SEE REVERSE SIDE