Specification Sheet

15
taprite.com 800-779-8488
TAPRITE ADVANTAGE: REGULATORS
Many of our clients often ask us, “What does Taprite’s regulator have that
others’ don’t?”
Well, not to toot our own horn, but Taprite brand regulators are superior to many
regulators in the industry for several reasons. Here’s a few:
1. The most obvious to spot is that the Taprite Regulator has a hand dial (red
circular dial in the center of the regulator) as opposed to the other regulators
having a screw driver dial. The hand dial makes it very convenient to adjust
your pressure at any time without having to grab a screwdriver to do so.
Although this doesn’t sound like that big of deal, having the hand dial makes
life a whole hop easier!
2. The Taprite regulators maintain better pressure, even when your tank gets
low. Some regulators have a hard time keeping accurate pressure as the
CO2 tank empties, but with the Taprite regulator, your kegs will always be
under the exact pressure that you want!
3. Taprite regulators have superior seals; they have a permanent Quad-Ring
Seal on the inlet nipple, which helps eliminate a source of leaks. So, that
pesky task of replacing your ber washer every time you change your tank is
long gone! Permanent seals means less leaks, and a longer life.
4. Taprite Regulators are approved for use by all major breweries.
5. The Taprite Regulator has a “Shut down” safety system (blow off at 55 to 60 PSI.)
6. Taprite regulators also use Heavy duty UL rated dual gauges.
We can vouch for our Taprite Regulator’s until we’re blue in the face, but until you
experience Taprite’s Regulator for yourself, we’re just boiling mash.
We hope this helps you Weizen up when it comes time to purchase your next
regulator!