User Manual

Tarana Wireless, Inc. Proprietary, Confidential, and ©2020. All rights reserved. vG1-2020-12 (DRAFT) G1 BN Manual — 12
Physical Installation
The BN mount is a saddle clamp that is adjustable in azimuth and tilt. The tilt
should be set to zero degrees and the azimuth to the required direction. In typical
installation, the BN is installed on an outrigger which gets mounted to the tower.
Note: The GPS antenna mounted on the top of the BN must have a clear view of the
sky to establish synchronization.
Step 1. Place mounting bracket clamp halves around pole.
NOTE: Head of bolt captured in the slot of the clamp assembly
Be sure to keep the clamp halves parallel to each other.
BN Mount
Outrigger installed with BN Mount
BN Installed on Tower