User Manual

Step 2. Torque all fasteners to 19 N-M (14 ft-lbs). Torque sequence as shown.

3 times around bolt pattern

• Round 1= 30%

• Round 2 = 60%

• Round 3 = 100%

Use of combination wrench for locations 2 and 3 may be needed due to

clearances.

Universal joint socket wrench may also be used.

Final torque reading can be applied to bolt #1 and #4, as it will be difficult

to access #2 and #3 with the torque wrench (opposite facing view).

Step 3. Perform azimuth adjustment

Azimuth scale on top side of adjustment bracket

13mm combination wrench being used to hold the fastener for torque

setting. Torque sequence as shown.