User Manual
Tarana Wireless, Inc. Proprietary, Confidential, and ©2020. All rights reserved. vG1-2020-12 (DRAFT) G1 BN Manual — 17
Configuration & System Bring-up
Connecting the unit to DC power initiates its boot-up process. When that is
complete (typically 3–4 minutes), the rear panel Power LED shows steady green.
Basic outdoor setup requires the following steps. For safety, the radio is muted by
default.
Note: The GPS antenna mounted on the top of the BN must have a clear view of the
sky to establish synchronization.
Connect your device to the unit’s Management port. Note: this port is DHCP
enabled. Point your device’s browser at the unit’s management IP address to
access the BN’s webUI. Login using the credentials provided by your network
administrator.