User's Manual

Bluetooth
®
Wireless Presenter
6
Bluetooth
®
Wireless Presenter
7
Initial Configuration
NOTE: PLEASE USE THE LATEST BLUETOOTH DEVICE DRIVER. INSTRUCTION
SCREENS MIGHT VARY DEPENDING ON THE VERSION OF YOUR BLUETOOTH DEVICE
DRIVER.
Before you can begin using your Bluetooth presenter, you will first need to
perform some initial setup steps.
Bluetooth Software: Mac
1. Go to the Bluetooth icon located on your desktop or in the system bar and
click the icon to begin setup. Select “Turn Bluetooth On” to activate the
Bluetooth function on your Mac.
2. Scroll down the list and select “Set up Bluetooth Device...”
3. Bluetooth Setup Assistant will begin. Please follow the on-screen
instructions.
4. Select “mouse” and click continue to proceed with setup. Your presenter will
need to be in “discovery” mode to connect. First, turn on the presenter then
press and hold the “on” button for 3 seconds to enter into discovery mode.
The LED at the Touch Scroll will blink continuously to indicate “discovery”
mode is enabled.