User guide

Targus ExpressCard Notebook Docking Station with Digital Video and Audio
10
4. After connecting the ExpressCard to the computer, wait until
the computer finishes recognizing the devices before pressing
OK in the dialogue box. This process will take about 3-5
minutes.
Windows Vista - dailogue box
Windows XP - dailogue box
3. Connect the ExpressCard card into an available ExpressCard
slot in your notebook.
WARNING: THE DOCKING STATION WILL NOT FUNCTION PROPERLY WITHOUT
THE AC ADAPTER PLUGGED INTO AN AC OUTLET.
DO NOT CONNECT ANY DEVICES TO THE DOCKING STATION UNTIL THE
SOFTWARE HAS BEEN INSTALLED AND THE AC ADAPTER HAS BEEN PLUGGED
IN.
2. Connect one end of the ExpressCard cable to the docking
station and the other end into the ExpressCard card.
1. Connect one end of the assembled AC power adapter to the
AC power jack on the docking station and the other end to a
power outlet.
Connecting the Docking Station
to your Computer
NOTE: WHEN CONNECTING THE CABLE TO THE EXPRESSCARD, PLEASE MAKE
SURE THE CABLE TIP IS PROPERLY AND COMPLETELY INSERTED INTO THE
CABLE PORT ON THE EXPRESSCARD. MAKE SURE THE TIP IS CONNECTED IN
THE CORRECT DIRECTION AND DO NOT FORCE THE CONNECTION OR IT MIGHT
BREAK THE DEVICE.