USB 2.0 Memory Card Reader/Writer TGR‐MS20 System Requirements Connection USB 2.0 Port for Hi‐Speed data transfer Minimum Operating System Support Windows o Windows 98SE (driver installation required) o Windows ME o Windows 2000 o Windows Vista o Windows XP Macintosh o Mac OS 9.2+, 10.2+ Unpacking Package Contents USB 2.
Understanding What’s a USB port? The Universal Serial Bus (USB) port is an easy way to connect a new device like the Targus USB 2.0 Reader/Writer to your computer. Connecting a device to the USB port doesn’t require that you open your computer to install an add‐in card or set complicated switches. You just plug it in and get started. How do I find the USB port? The USB ports are often located on the front or back of your PC, or on a USB hub.
Connecting Connecting the Targus USB 2.0 Reader/Writer to the USB port is simple. You don’t need to turn off or restart your computer when attaching the Targus USB 2.0 Reader/Writer. Since the Targus USB 2.0 Reader/Writer is powered by the USB connection, an AC/DC power adaptor is NOT needed. Before connecting the Targus USB 2.0 Reader/Writer, complete the device driver installation. See INSTALLING. Use the USB cable to connect your card reader/writer to the computer directly. When the Targus USB 2.
Using NOTE: WHEN INSERTING YOUR MEMORY CARD, THE CARD READER SHOULD BE HELD WITH THE TARGUS LOGO FACING UP. The Targus USB 2.0 Memory Stick Card Reader/Writer has one card slot which is only compatible with Memory Stick (MS) Memory Cards. Inserting Cards To insert your Memory Stick memory card into the Targus USB 2.0 Reader/Writer slot insert the connector end of the card with the card label facing up. DO NOT force the card into the slot.
B. Double click on the removable disk drive (for the Targus USB 2.0 Reader/Writer), i.e. E: or F: or maybe G: Now you should see a folder DCIM (that stands for Digital Camera Images). C. Double click on the DCIM folder. Now you should see your camera folder, i.e. 100Olymp or 100Canon or 100Fuji. D. Double click on the camera folder. Now you should see your pictures or picture file names (depending on what Operating System you are using). E. Go up to the menu bar where it says “EDIT” and click “Select All”.
Windows Use the hotplug icon in the notification area of the taskbar to safely stop the device before unplugging it. The notification area is on the right side of the taskbar where you usually see the time displayed. These steps are not required for Windows 98SE or XP. 1. In the notification area, right‐click on the hotplug icon. 2. Select the device you want to unplug then click STOP. 3. When Windows notifies you that it is safe to do so, unplug the Targus USB 2.0 Reader/Writer from your computer.
Technical Support Please do not attempt to fix the product by yourself. If you are experiencing any problems with your card reader/writer please do not return it to the store from where it was purchased. You can contact our technical support representatives and they will assist you with any questions you may have. For assistance operating your product please consult the User’s Manual or feel free to contact Targus Digital LLC technical support: 180 Maiden Lane 28th Floor New York, New York 10038 www.
