Wireless Laser Rechargeable Notebook Mouse USER GUIDE
CAUTION LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS I LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB.
TARGUS WIRELESS LASER RECHARGEABLE NOTEBOOK MOUSE Introduction Congratulations on your purchase of the Targus wireless laser rechargeable notebook mouse . This ergonomically designed mouse uses a radio frequency (RF) link that enables you to use the mouse anywhere within 1 m of its receiver. No line-of-sight between the mouse and its receiver is required.
Wireless Laser Rechargeable Notebook Mouse NOTE: THE THIRD BUTTON AND THE SCROLLING WHEEL ONLY WORK WITH THE OPERATING SYSTEMS LISTED ABOVE. IF YOU USE THE MOUSE WITH A DIFFERENT OPERATING SYSTEM, IT WILL LOSE ITS ENHANCED FEATURES AND FUNCTION AS A STANDARD, TWO-BUTTON MOUSE. Connecting the Mouse Receiver To connect the mouse receiver: 1 Plug the USB receiver into an available USB port on your computer. 2 Your computer’s operating system identifies the receiver and begins installing the default driver.
Wireless Laser Rechargeable Notebook Mouse NOTE: THE BATTERY COVER IS ALSO THE TOP COVER OF THE MOUSE. r se la on off ID OPEN Battery cover release button 3 Insert the supplied batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery housing. WARNING: WHEN REPLACING THE BATTERIES, USE ONLY HEAVY-DUTY NIMH BATTERIES. RECHARGING ALKALINE BATTERIES MAY DAMAGE THE MOUSE. AVOID MIXING NEW AND USED BATTERIES IN A DEVICE.
Wireless Laser Rechargeable Notebook Mouse Operating Notes for Wireless Mice with Recharging Feature via USB Cable 1. Charge the mouse for at least 8 hours before using it. And please make sure only rechargeable batteries (the ones that come with your product) are used. 2. Your computer needs to stay powered on for the mouse to charge.
Wireless Laser Rechargeable Notebook Mouse Charging the Batteries For best results, you should charge the mouse at least 8 hours before using it. You can do this via the supplied USB charge cable. To do this: 1 Connect the cable’s USB connector into an available USB port on your computer 2 Connect the other end to the mouse. NOTE: TO CONTINUOUSLY CHARGE THE MOUSE VIA THE USB CHARGE CABLE, YOUR COMPUTER MUST BE ON AND AWAKE.
Wireless Laser Rechargeable Notebook Mouse 1 Press and release the link button located on the bottom of the receiver. Status light Receiver The receiver’s status light blinks when the receiver is activated. 2 Press and release the link button, located on the bottom of the mouse. You are now ready to use the mouse. Mouse Power Management To power the mouse on and off, slide the on/off switch at the bottom of the mouse to the desired position.
Wireless Laser Rechargeable Notebook Mouse Operating Hints For optimal performance and RF reception: • Place the receiver at least 20cm away from all electrical devices, such as your monitor, speakers or external storage devices. • If necessary, use the supplied extension cable to keep the receiver away from the computer. Plug the receiver into the extension cable, and the extension cable to the computer. • Avoid using the mouse on a metal surface.
Wireless Laser Rechargeable Notebook Mouse Comfortable Usage Research suggests that physical discomfort and injury to nerves, tendons, and muscles may be related to repetitive motion, an improperly set up work area, incorrect body posture, and poor work habits. To reduce the risk of injury, follow these precautions: • Stand, stretch, and move around several times every hour. • Switch hands while performing tasks. Use shortcut keys to avoid repetitive or awkward mouse movements.
Wireless Laser Rechargeable Notebook Mouse • Check that the receiver’s USB connector is firmly attached to the USB port on your computer. • Verify that the device drivers are installed. • Make sure you have established a radio link between the mouse and its receiver. See “Establishing a Communications Link”.
Wireless Laser Rechargeable Notebook Mouse I can’t use the mouse while another RF mouse is in use – what should I do? • Reset the identification code. See “Establishing a Communications Link”.
Wireless Laser Rechargeable Notebook Mouse Technical Support For technical questions, please visit: US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com.au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp.
Wireless Laser Rechargeable Notebook Mouse FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Visit our Website at www.targus.com Features and specifications subject to change without notice. © 2006 Targus Group International, Inc. and Targus, Inc.
