Technical Specifications

VeriCore™
Product S pecification
Tarkett North America
Technical Services Department
30000 Aurora Road
Solon, Ohio 44139
888-639-8275 Fax [phone]
[e-mail]
www.tarkettna.com © 2020 Tarkett USA Inc. 011620
VeriCore™ flooring can be installed in Residential, Light-Commercial and
3-Season Room applications by following the recommendations outlined
in the Tarkett VeriCore™ Installation Instructions at www.tarkettna.com
1. PRODUCT DETAILS
 Nominal Thickness: 0.197” (5 mm)
 Core Thickness: 0.157” (4 mm)
 Accoustical Backing: 0.039” (1mm) IXPE
 Wearlayer Thickness: 0.020” (.51 mm)
 Edge Treatment: Microbeveled
7”x48”
178mm x
1220 mm
Number of
Styles
4
Square Feet
per Carton
19.05
(1.77m²)
Planks per
Carton
8
Cartons per
Pallet
75
Lbs. per
Carton
44
2. PRODUCT PERFORMANCE AND TECHNICAL DATA
2.1. Dimensional Stability: ASTM F2199: Passes
2.2. Heat Stability: ASTM 1514: ∆E ≤ 8
2.3. Light Stability: ASTM F1515: ∆E ≤ 8
2.4. Residual Indentation : ASTM F1914: Passes
2.5. Stain Resistance: ASTM F925: Passes
2.6. Impact Sound: ASTM E2179: ∆IIC ≥ 21 dB
2.7. Slip Resistance: ASTM D2047: SCOF ≥ 0.5
2.8. Fire Performance: ASTM E648: ≥ 0.45 w/cm²
2.9. FloorScore® Certification: SCS-EC10.3-2014 v3.0
3. INSTALLATION – Refer to Carton for Detailed Installation
Instructions.
 Maintain the work area between 55° F and 95° F (12°C - 35°C)
for 48 hours before and during Installation. Refer to Installation
Instructions for complete details regarding applications with
and without permanent HVAC controls.
 Cartons shall be stored horizontally on a sturdy base at all
times.
4. WARRANTY – See Carton for complete details, or contact Tarkett
Technical Services at [phone].
 LIFETIME RESIDENTIAL LIMITED WARRANTY
 20-YEAR LIGHT COMMERCIAL LIMITED WARRANTY
 10-YEAR 3-SEASONS ROOM LIMITED WARRANTY
5. MAINTENANCE
5.1. Furniture can be replaced immediately after installation.
5.2. Never slide heavy furniture or appliances across the floor.
Place sheets of plywood over finished floor when moving
furniture and appliances into position.
5.3. Use non staining mats or area rugs at doorways and
entranceways to collect excess water, sand, grit and debris.
Clean the mats and area rugs on a regular basis.
5.4. Use smooth, hard plastic or metal furniture rests or glides
under frequently moved furniture to avoid scratches and
indentations. Do not use felt pads.
5.5. Clean floor using a neutral pH floor cleaner. Follow
manufacturers label instructions for precaution and use.
7. TECHNICAL SERVICES
For current Installation and Maintenance Instructions,
Product Specifications, and other technical data, visit
www.tarkettna.com or contact Tarkett at (888)-639-8297.