Technical Specifications

Free Span™ Locking Technology
SO LVT Product Specification
Flooring can be installed in Residential applications by following the
recommendations outlined in the Tarkett LVT Installation Instructions
at www.tarkettna.com
1. PRODUCT DETAILS
 Nominal Thickness: 0.177” (4.5 mm)
 Acoustical Backing: 0.039” (1mm) IXPE
 Wearlayer Thickness: 0.012” (.30 mm)
 Plank Width: 7.13” (181mm)
 Plank Length: 48.03” (1220 mm)
 Finish Edge: Square
 Finish: Polyurethane
 Square Feet per Carton: 28.52 (2.61m²)
 Planks per Carton: 12
 Cartons per Pallet: 55
 Lbs. per Carton: 39.47 (17.9 kg)
 Material: Phthalate Free, 100% Virgin Material
 Reusable Content: 100% Reclaimable
 Installation System: UniClic Locking System
2. PRODUCT PERFORMANCE AND TECHNICAL DATA
2.1. Dimensional Stability: ASTM F2199: Passes
2.2. Static Load Limit: ASTM F970: Passes
2.3. Heat Stability: ASTM 1514: ∆E ≤ 8
2.4. Light Stability: ASTM F1515: ∆E ≤ 8
2.5. Residual Indentation : ASTM F1914: Passes
2.6. Stain Resistance: ASTM F925: Passes
2.7. Impact Sound: ASTM E2179: ∆IIC ≥ 22 dB
2.8. Slip Resistance: ASTM D2047: SCOF ≥ 0.5
2.9. Fire Performance: ASTM E648: ≥ 0.45 w/cm²
2.10. Smoke: ASTM E662 ≤ 450
2.11. FloorScore® Certification SCS-EC10.3-2014 v4.0:
#SCS-FS-04739
3. INSTALLATION – Refer to Detailed Installation
Instructions at www.tarkettna.com
• Maintain the LVT product and work area between 55° F and 85° F
(12°C - 29°C) for 48 hours before, during, and after installation.
• Cartons shall be stored horizontally on a sturdy base at all times.
• This LVT product and ProSheet Plus 3 is an acceptable
installation system. (Follow ProSheet Plus 3 Installation
Instructions).
4. WARRANTY – For complete details, contact Tarkett Technical
Services or go to www.tarkettna.com
 LIFETIME RESIDENTIAL LIMITED WARRANTY
 10-YEAR LIMITED COMMERCIAL WARRANTY
5. MAINTENANCE
5.1. Furniture can be replaced immediately after installation.
5.2. Never slide heavy furniture or appliances across the floor.
Place sheets of plywood over finished floor when moving
furniture and appliances into position.
5.3. Use non staining mats or area rugs at doorways and
entranceways to collect excess water, sand, grit and debris.
Clean the mats and area rugs on a regular basis.
5.4. Use smooth, hard plastic or metal furniture rests or glides
under frequently moved furniture to avoid scratches and
indentations. Do not use felt pads.
5.5. Clean floor using Tarkett SureShine® Floor Cleaner or an
equivalent pH neutral floor cleaner. Follow manufacturers
label instructions for precaution and use.
7. TECHNICAL SERVICES
For current Installation and Maintenance Instructions,
Product Specifications, and other technical data, visit
www.tarkettna.com or contact Tarkett at (888)-639-8297.
Tarkett North America
Technical Services Department
30000 Aurora Road
Solon, Ohio 44139
888-639-8275 Fax [phone]
[e-mail]
www.tarkettna.com © 2019 Tarkett USA Inc. 080719