Manual

TASCAM BD-MP4K 25
Test Tone More…
This outputs white noise from the speakers in counterclockwise
order starting from the L speaker. Press the ENTER button while a
speaker is highlighted to enable changing its speaker size, trim and
delay settings.
1
NOTE
The options and setting ranges are the same as in the channel
configuration, but the subwoofer cannot be adjusted.
*
1
Trim adjustment overview
Digital full scale (−10 dB) is shown as “0” to make adjustment of surround channel speaker volume differences easier.
If trim adjustment is unnecessary, leave it at its default setting (+10 dB).
*
2
Lt/Rt is a two-channel downmix output that supports Dolby surround. When played on an ordinary stereo system, the L and R channel
balance could be degraded. If this occurs, select Stereo.
Post-processing settings
Function Options Explanation
EQ
Off/Rock/Pop/Live/Dance/Classical/Soft
The applies equalization to the audio.
Downmix Off/DH/DVS/MVS
This downmixes surround audio.
p DH: Dolby headphones
p DVS: Dolby virtual speakers
o Reference/Wide
p MVS: Virtual speakers
o Movie/Music
NOTE
MVS can only be used when the speaker setting channel
configuration is 2.x.
S/PDIF Output Configuration
Function Options Explanation
Configuration
p FL/FR
p SL/SR
p C/SW
p SBL/SBR
p L/R (−10 dBF)*
The selection items are the same signals that are output from the
analog outputs on the back of the unit.
The selected analog output* is output from the COAXIAL digital
audio output connector.
* The maximum audio level will become −10 dBF only for L/R
System Information
Use to check the MAC address and revision of this unit.
o Model: BD-MP4K
o MAC address: xx-xx-xx-xx-xx-xx
o Revision: xxx.xxx